Kingston 1GB 240-pin DIMM
Above Image is for Illustration Purposes Only
Click Once to Zoom In, twice to Lock Zoom

Kingston 1GB 240-pin DIMM for HP/Compaq Pavilion d Series Desktop d4141.se

Email to a Friend

Be the first to review this product

$78.99

Quick Specs

Part #. KTH-XW4200AN/1G • DDR2-533 / PC2-4200 • 1.8V

240-pin DIMM


240-pin DIMM image

A DIMM, or dual in-line memory module, comprises a series of dynamic random access memory integrated circuits (DRAM chips). These modules are mounted on a printed circuit board and designed for use in personal computers, workstations and servers.

DDR2 SDRAM is a double data rate synchronous dynamic random access memory interface. It supersedes the original DDR SDRAM specification and the two are not compatible. In addition to double pumping the data bus as in DDR SDRAM (transferring data on the rising and falling edges of the bus clock signal), DDR2 allows higher bus speed and requires lower power by running the internal clock at one quarter the speed of the data bus.

240-pin DIMMs are used to provide DDR SDRAM memory for desktop computers and servers. Standard 240-pin DIMMs are available in PC2-4200 DDR2 SDRAM, PC2-5300 DDR SDRAM, PC2-6400 DDR SDRAM, and PC2-8500 DDR SDRAM.

To use DDR2 memory, your system motherboard must have 240-pin DIMM slots and a DDR2-enabled chipset. A DDR2 SDRAM DIMM will not fit into a standard SDRAM, DDR, or DDR3 DIMM socket.. (Information about which memory technology your system uses is included in the specific brand/model section of our website.)

The number of black components (DRAM chips) on a 240-pin DIMM can vary, but it always has 120 pins on the front and 120 pins on the back, for a total of 240. 240-pin DIMMs are typically 5.25 inches long and 1.25 inches high, though the heights can vary. While 240-pin DDR2 DIMMs and 184-pin DDR DIMMs are approximately the same size, 240-pin DIMMs have the notch positioned slightly differently, which prevents DDR2 memory from being installed in a non-DDR2 compatible motherboard.

Several form factors are commonly used in DDR2 DIMMS. When first introduced, they were created with a "Low Profile" (LP) height of ~1.2" (31.2mm). These fit into vertical DIMM sockets for a 1U platform. With the advent of blade servers, the LP form factor DIMMs have once again been often angled to fit in these space-constrained boxes. This led to the development of the Very Low Profile (VLP) form factor DIMM with a height of ~.72" (18.3 mm). The DDR3 JEDEC standard for VLP DIMM height is 18.75mm.

RamCity acknowledges the contributors to the Wikipedia article DDR2 SDRAM. Some of the text from that article has been reproduced here.

Support Wikipedia

Specifications

Form Factor 240-pin DIMM
Voltage 1.8V
Speed DDR2-533 / PC2-4200
Brand Kingston
Size 1GB
Pieces in Kit 1
OEM Part No 382510-001 (HP/Compaq); 393394-001 (HP/Compaq); PV557AA (HP/Compaq)

Free Shipping, Payment, Returns and Replacements


Free Shipping and Delivery

FREE Shipping
We offer free, fast shipping to all locations in New Zealand, regardless of order size.
Delivery Times
  • All Kingston brand products are shipped directly from our supplier in Auckland via NZ Couriers or CourierPost.
  • All non-Kingston products (RamCity, Samsung, Hynix, etc), are shipped from both our Auckland warehouse via CourierPost and our central distribution centre in Brisbane, Australia via FedEx. (We pay any applicable duties or taxes!)
  • Delivery times for Kingston products are usually overnight. For RamCity brand products delivery can take 1-3 business days.1 All deliveries are made Monday to Friday 8am-5pm, excluding public holidays.
  • We cannot ship to PO Boxes, as a signature upon delivery is required. (There are some exceptions, so please contact us if you have a special requirement for PO Box shipping.
  • Please allow an additional business day if your order is placed after 1pm NZT.

1. In rural or remote areas, please allow an extra 2 business days.


Payment Options and Pricing

Payment Options
  • We accept Mastercard, Visa and PayPal. No surcharges apply.
  • No Payment Terms are available.
Pricing
  • All pricing is shown in NZD.
  • All payments are processed in NZD.
Back to the top ↑
Warranty Replacements and Refunds
Full details of our comprehensive and convenient return policy are here.
Back to the top ↑

Stock Levels
  • Stock levels shown on our website are updated early each morning.
  • Most stock is on hand and is ready for immediate shipping once your payment has been cleared.
  • Products requiring back order are marked 'Ships in xx Days'.
  • For up-to-the-minute stock levels, please contact our Customer Service Team.
  • If your product is not in stock, then we will back order it with our usual weekly stock order (if it's a RamCity brand product), or order it immediately from our suppliers. Generally it takes around 7 days to fill back orders, although some hard-to-get items may take longer. We will notify you of any unexpected delays.
  • Although your credit card is charged up-front, you are able to cancel the order at anytime and have the transaction reversed. We do not charge any cancellation or restocking fees.
Back to the top ↑

GST and Import Duties
  • All prices quoted on RamCity.co.nz are exclusive of GST.
  • As we are an Australian company trading in New Zealand we are currently not required to collect GST.
  • Orders for Kingston products ship direct from our supplier in Auckland.
  • IMPORTANT: Orders of non-Kingston brand products (such as RamCity, Micron, Samsung, Hynix, etc), or orders with both Kingston and non-Kingston products combined, will ship from our Sydney distribution centre. Regardless of the order value, RamCity pay all applicable import duties and taxes on your behalf, so there is nothing more for you to pay!
Back to the top ↑

<-- Back to Help and Support

Questions on Kingston 1GB 240-pin DIMM


No questions asked yet

Ask Your Own Question








Video Testimonials & Reviews

Write Your Own Review

You're reviewing: Kingston 1GB 240-pin DIMM

How do you rate this product?*
  1 star 2 stars 3 stars 4 stars 5 stars
Compatibility
Price



 
We guarantee your memory upgrade will be 100% compatible, or return it within 1 Whole Year for a full refund.
Need some help installing your upgrade? See our guides and videos.
System Specifications
Comments:
  • MODULES MAY BE INSTALLED ONE AT A TIME; however, they must be added in like pairs to take advantage of Dual Channel Mode.
  • This system is configurable and may ship with either DDR2-400 (KTH-XW4200/xx) or DDR2-533 (KTH-XW4200AN/xx).
  • Both memory types are compatible, however, when mixed they will default to DDR2-400.
  • If 4GB is installed, the recognized memory may be reduced to 3.5GB or less (depending on system configuration and memory allocation).
  • Models with "-b" are bundled.
Standard Memory:
  • 256MB (Removable) or
  • 512MB (Removable) or
  • 1GB (Removable) or
  • 2GB (Removable)
Maximum Memory:
  • 4GB
Expansion:
  • 4 Sockets
CPU/Chipset:
  • Intel Pentium 4 3.4 GHz Intel 915P
Bus Architecture:
  • PCI; PCI Express; USB
Mfr's System P/N's:
  • EG632AA
Upgrade Path:
  • Virtually any configuration up to 4GB can be reached using any combination of 512MB and 1GB modules.