RamCity 512MB CL3 ECC Registered 168-pin DIMM
Above Image is for Illustration Purposes Only
Click Once to Zoom In, twice to Lock Zoom

RamCity 512MB CL3 ECC Registered 168-pin DIMM for IBM/Lenovo PC 300 Series 300GL Pentium III (6563-Axx,Bxx,Cxx)

Email to a Friend

Be the first to review this product

$67.99

Quick Specs

Part #. ABI • PC133 • CL3 • ECC • Registered • 3.3V • 18-chip 64M x4

168-pin DIMM


168-pin DIMM image

A DIMM, or dual in-line memory module, comprises a series of dynamic random access memory integrated circuits (DRAM chips). These modules are mounted on a printed circuit board and designed for use in personal computers, workstations and servers.

168-pin DIMMs are commonly found in computers with original Pentium® and AMD Athlon® CPUs. They are typically available in EDO, 66MHz SDRAM, PC100 SDRAM, and PC133 SDRAM speeds.

To use SDRAM memory, your system motherboard must have 168-pin DIMM slots. A SDRAM DIMM will not fit into a standard DDR, DDR2, or DDR3 DIMM socket.. (Information about which memory technology your system uses is included in the specific brand/model section of our website.)

The number of black components (DRAM chips) on a 168-pin DIMM can vary, but it always has 84 pins on the front and 84 pins on the back, for a total of 184. 168-pin DIMMs are typically 133mm (5.25 inches) long and 35mm (1.25 inches) high, though the heights can vary. While 168-pin DIMMs and 184-pin DIMMs are approximately the same size, 168-pin DIMMs have two notches within the row of pins, rather than just one.

Several form factors are commonly used in DIMMs. Single Data Rate (SDR) SDRAM DIMMs commonly came in two main heights: 43.2mm (1.7-inch) and 38.1mm (1.5-inches). When 1U rackmount servers started becoming popular, these form factor Registered DIMMs had to plug into angled DIMM sockets to fit in the 1.75" high box. To alleviate this issue, the next standards of DDR DIMMs were created with a "Low Profile" (LP) height of ~30.5mm (1.2 inches).

RamCity acknowledges the contributors to the Wikipedia article DIMM. Some of the text from that article has been reproduced here.

Support Wikipedia

Specifications

Form Factor 168-pin DIMM
CAS Latency CL3
Configuration 18-chip 64M x4
Voltage 3.3V
ECC ECC
Registered / Buffered Registered
Speed PC133
Brand RamCity
Size 512MB
Pieces in Kit 1
OEM Part No 33L3085 (IBM); 33L3086 (IBM); FRU 34P5638 (IBM)

Free Shipping, Payment, Returns and Replacements


Free Shipping and Delivery

FREE Shipping
We offer free, fast shipping to all locations in New Zealand, regardless of order size.
Delivery Times
  • All Kingston brand products are shipped directly from our supplier in Auckland via NZ Couriers or CourierPost.
  • All non-Kingston products (RamCity, Samsung, Hynix, etc), are shipped from both our Auckland warehouse via CourierPost and our central distribution centre in Brisbane, Australia via FedEx. (We pay any applicable duties or taxes!)
  • Delivery times for Kingston products are usually overnight. For RamCity brand products delivery can take 1-3 business days.1 All deliveries are made Monday to Friday 8am-5pm, excluding public holidays.
  • We cannot ship to PO Boxes, as a signature upon delivery is required. (There are some exceptions, so please contact us if you have a special requirement for PO Box shipping.
  • Please allow an additional business day if your order is placed after 1pm NZT.

1. In rural or remote areas, please allow an extra 2 business days.


Payment Options and Pricing

Payment Options
  • We accept Mastercard, Visa and PayPal. No surcharges apply.
  • No Payment Terms are available.
Pricing
  • All pricing is shown in NZD.
  • All payments are processed in NZD.
Back to the top ↑
Warranty Replacements and Refunds
Full details of our comprehensive and convenient return policy are here.
Back to the top ↑

Stock Levels
  • Stock levels shown on our website are updated early each morning.
  • Most stock is on hand and is ready for immediate shipping once your payment has been cleared.
  • Products requiring back order are marked 'Ships in xx Days'.
  • For up-to-the-minute stock levels, please contact our Customer Service Team.
  • If your product is not in stock, then we will back order it with our usual weekly stock order (if it's a RamCity brand product), or order it immediately from our suppliers. Generally it takes around 7 days to fill back orders, although some hard-to-get items may take longer. We will notify you of any unexpected delays.
  • Although your credit card is charged up-front, you are able to cancel the order at anytime and have the transaction reversed. We do not charge any cancellation or restocking fees.
Back to the top ↑

GST and Import Duties
  • All prices quoted on RamCity.co.nz are exclusive of GST.
  • As we are an Australian company trading in New Zealand we are currently not required to collect GST.
  • Orders for Kingston products ship direct from our supplier in Auckland.
  • IMPORTANT: Orders of non-Kingston brand products (such as RamCity, Micron, Samsung, Hynix, etc), or orders with both Kingston and non-Kingston products combined, will ship from our Sydney distribution centre. Regardless of the order value, RamCity pay all applicable import duties and taxes on your behalf, so there is nothing more for you to pay!
Back to the top ↑

<-- Back to Help and Support

Questions on RamCity 512MB CL3 ECC Registered 168-pin DIMM


No questions asked yet

Ask Your Own Question








Video Testimonials & Reviews

Write Your Own Review

You're reviewing: RamCity 512MB CL3 ECC Registered 168-pin DIMM

How do you rate this product?*
  1 star 2 stars 3 stars 4 stars 5 stars
Price
Compatibility



 
We guarantee your memory upgrade will be 100% compatible, or return it within 1 Whole Year for a full refund.
Need some help installing your upgrade? See our guides and videos.
System Specifications
Comments:
  • This system comes standard with non-ECC SDRAM (KTM3071/xx), but also supports ECC SDRAM (KTM3079/xx).
  • When mixing ECC and non-ECC modules, the system will not perform the ECC function.
Standard Memory:
  • 64MB (Removable)
  • 128MB (Removable)
Maximum Memory:
  • 1GB
Expansion:
  • 2 Sockets
CPU/Chipset:
  • Intel Pentium III 733 MHz
  • Intel Pentium III 866 MHz
Bus Architecture:
  • PCI
Mfr's System P/N's:
  • 6563-Axx; 6563-Bxx; 6563-Cxx
Upgrade Path:
  • Virtually any configuration up to 1GB can be reached using any combination of 512MB modules.